≡ Menu

You're Here: Home » Clones » Build a Clone Machine

Build a Clone Machine

Clone Machine

Build a Clone Machine step-by-step how-to instructions. Building your own clone machine for marijuana plant clones can save you money and allows you the chance to customize your clone machine to the size and to the amount of clones it will hold. My method costs approx. $90 compared to $300 EZ Clone Machine – 30 from hydroponic grow stores.

Materials needed to Build A Clone Machine

-18 gallon rubber maid container with lid.
Rubbermaid 2212CPDIM Roughneck Storage Box

10 feet of 1/2″ pvc pipe
Charlotte Pipe & Foundry PVC 04005 0200 1/2″ x 2′ Pvc Sch 40 Solid Pipe – White

Pvc Primer and Pvc Cement
PVC Cement & Primer Twin Pack, 4 oz

4 – 1/2″ pvc 90 degree elbows
Genova Products 30705CP 1/2-Inch 90 Degree PVC Pipe Elbow – 10 Pack

7 – 1/2″ pvc tees
Genova Products 31405CP 1/2-Inch PVC Pipe Tee – 10 Pack

4 – 1/2″ pvc caps
Genova Products 30155CP 1/2-Inch PVC Pipe Cap, Slip – 10 Pack

1 – 1/2″ pvc female thread adapter
Genova Products 30305CP 1/2-Inch Female Iron Pipe Thread PVC Pipe Adapter Slip by Female Iron Pipe Thread – 10 Pack

1 – 1/2″ pvc male to female hose adapter
Gilmour 2939Q Premium Complete Garden Hose Quick-Connect Set

1 – submersible pump (minimum 300 GPH)
Beckett 7060110 210 GPH Underwater Pump for Small Ponds, Fountains, Waterfalls

10 – spray heads

2″ net pots with neoprene lids (as many as need for the size machine you build)
2 Inch Net Pot and EZ Clone Neoprene Collar Combo – 10 Pack

Tools needed:

-11/64″ Drill Bit

-1 7/8″ Hole Saw Bit

-Tape Measure

-Pipe Cutter

-Pen or Marker

Step-by-Step Video on How to Build a Clone Machine

This step-by-step video will show you exactly how to build a clone machine. I use the easiest and most cost effective way their is. As you can see in all of my clone pictures and videos, every clone I have is very healthy and 100% of them root within 5-6 days. I will be adding more videos in the future as I continue to find new and improved ways to build a clone machine.

How People found this article:
  • homemade cloning machine
  • aeroponic cloner build 1
  • how to build a clone machine
  • free video how tp build clone machine
  • cloning yourself in a machine step by step
  • clone machins cannabis
  • clone machine instructions
  • building a cloning machine
  • build your own clone
  • plant cloner machines

27 comments… add one

  • testuser February 15, 2012, 7:23 pm

    all of these answers are on this site.
    i let the air regulate the water temp. air temp is 75*
    pump is on 30mins every 6hrs
    flourescent lights with agrosun bulbs
    always use rockwool
    do not use RO water. ph 6.0 – as u can see in my vids and my site the nutrients i use are rockwool 1 a&b

    • Davebob February 15, 2012, 7:32 pm

      Thanks. Sorry I have just watched your videos. Are the lights the 24 inch tubes? If so how many do you have over the cloner?
      Do you soak the rockwool to get it to pH 6 or in pH6 water?
      My water is very hard here and I use an RO system to bring the ppm down to 275-300. Given that should I use tap water still?
      I haven’t encountered the nutes you describe, but that isn’t saying much. Do you have the nutes in from the beginning?

      • dizzle February 28, 2012, 11:10 pm

        yes 24″. 2 tubes in 1 fixture and thats it. yes soak the rockwool for 15mins prior to using. tap water is fine. yes nutes in from the beginning

  • Davebob February 15, 2012, 11:39 am

    I saw your video about the clone machine and I plan to build one.
    1. What is the temp that you have the water at?
    2. Do you control that or do you just let the air temp set the water temp?
    3. What temp do you put the air at around the cloner?
    4. How often does the pump run?
    5. What lighting do you use for the cloner?
    6. Do you always use Rockwool in the baskets for the aeroponic system?
    7. Does the water have any nutrient in it or is it just RO water set at pH 6?

    Thanks for your help. Your videos are very good!

  • greg January 23, 2012, 7:16 pm

    your video was on point – everything came out perfect except i had to make the pump come out of the size instead of the bottom because the pump was too big and kinking.. i have a few questions.. how long do you keep the pump on and water the clones? Also, do you need to use distilled water, if using tap water, what is a safe PH? I also saw on the site something about an airstone, do I need that as well? Or if there is anything else that I need? thanks so much for your help!

    • dizzle January 24, 2012, 6:57 pm

      you do not need distilled water.. tap water, fill reservoir or containers… let sit for min of 24 hours to release any impurities. then set ph to 6. use that water for 5 days at a time. then flush, clean and refill.. yes use an airstone!
      run the water for 30mins every 6 hours.. so a total of 2 hours a day of feeding.

  • thomas December 20, 2011, 9:32 am

    have you ever used peat pellets instead of the blocks??

    • dizzle December 24, 2011, 12:17 am

      no i have not used peat pellets. I have seen them in grow rooms, but no personal experience with them

      • Joe April 28, 2012, 2:47 pm

        I tried peat and the jiffy cubes. Don’t like them. They fall apart and the debris clogs the spray nozzles. Went to Rock wool as you described.

        • dizzle April 28, 2012, 4:47 pm

          good choice! peat stuff is junk!!

  • thomas December 18, 2011, 4:37 pm

    and what about a lid? should there be a lid to keep the humidity in there??? first time grower and have about 30 plants going and want to take clones off em..

  • thomas December 18, 2011, 4:34 pm

    so do you just continue to fill the tub with water or does it just recycle the entire time?? i know ther is a pump in there so thats just to push the water to the nozzles then it sprays and drips back down in the tub and recylces itself???

    • dizzle December 19, 2011, 7:19 pm

      it recycles for many days, but i always drain – wash – refill every 4-5 days. yes, u r correct about pump and spray!

      • thomas December 20, 2011, 9:25 am

        ok got it..have you ever used peat pellets??

  • Linda Smith November 12, 2011, 4:22 pm

    I forgot to ask also if anyone knows where I can go to get all the nutrients and rooting gell and netty pots this Lowes is just opening and they dont have all the stuff I need until the spring?

    • dizzle November 12, 2011, 5:26 pm

      all of this stuff is on this site under grow room supplies . everything u need!!!

  • Linda Smith November 12, 2011, 4:19 pm

    where on ebay can I find the sprinkler heads? The only sprinkler heads our Lowes has is the ones that you have to adjust.

    • dizzle November 12, 2011, 5:25 pm

      i have plenty of links to them here on my site via amazon.. (cheapest $$).. go under grow rooms, grow room supplies, then you will see everything u need!

  • jj November 3, 2011, 12:05 am

    Jeff I went to Lowes and there were tons of different kinds, also, anyone know what size hose to use?, i may have bought the wrong size??

    • dizzle November 4, 2011, 12:46 am

      1/2″-5/8″ hose depending on what your outlet size is on your pump. most require a 5/8″ outside diameter (OD) x 1/2″ inside diameter (ID) hose. Lowes has these where u can cut how much u need,

  • George November 1, 2011, 11:05 pm

    If one were to grow a single clone with one rockwool cube, what would be an efficient way to water it correctly? Fantastic system, just worried about the impact that would have on my water bill…

    • dizzle November 1, 2011, 11:15 pm

      you can use a small tupperware, keep approx. 1/2″ water in it all times. keep it aerated. ive grown 300 plants and the effect on the water bill is like having 1 more person in your house.

  • JEFF lOPEZ June 22, 2011, 10:39 am

    all this stuff is on Ebay and it’s cheap!!!!!!!!!!!!!!!!!!!!!!!!! Excellent! You have saved me Big Time Bucks :~)

    • dizzle August 29, 2011, 7:02 pm

      ebay, amazon etc… everywhere! ;))

  • JEFF lOPEZ June 22, 2011, 5:31 am

    I cant Thank You enough, you did a hell of a job and I most certinly am following your footsteps.

    • JEFF lOPEZ June 22, 2011, 5:45 am

      I cant find the spray heads????? can someone tell me wher to buy them?

Leave a Comment